- Improves workability
- Outperforms traditional Vinsol resin-based plasticisers
- Air entraining liquid plasticising admixture
- Easier tamping down and alignment
- Improves workability
- Provides resistance to freeze/thaw cycling down to -2oC
- Chloride free (chloride ion content <0.1%)
- Reduces bleeding and salt formation
- Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence
- Usage: Using at an addition rate of 125 – 250cc per 50kg cement
- Conforms to BSEN934- Part 3
- Improves workability
- Outperforms traditional Vinsol resin-based plasticisers
- Air entraining liquid plasticising admixture
- Easier tamping down and alignment
- Improves workability
- Provides resistance to freeze/thaw cycling down to -2oC
- Chloride free (chloride ion content <0.1%)
- Reduces bleeding and salt formation
- Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence
- Usage: Using at an addition rate of 125 – 250cc per 50kg cement
- Conforms to BSEN934- Part 3
Everbuild’s Mortar Admix has been designed to improve the workability of mortar mixes by forming air bubbles inside the substrate giving it a ‘buttery’ texture. Admix also protects the mortar from the freeze/thaw cycle in the long term. Replacing Lime in the process, using this admixture will improve the consistency of separate batches of sand and cement. Areas for use: Load bearing brickwork, Block laying, External/Internal rendering, Pointing/repointing brickwork.
Ratios:
BRICKLAYING/POINTING Use a mix design appropriate to brick strength (1 : 3 to 1 : 6).
INTERNAL RENDERS 1 : 6 + MORTAR ADMIX
EXTERNAL RENDERS 1 : 3 + MORTAR ADMIX
Click on the links below to download the product data sheets: